Focus Documentation

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
1_0:install-source [2019/06/17 08:39]
admin [Compiling Focus] 		1_0:install-source [2025/05/17 11:45] (current)
admin [libfftw3]
Line 7: Line 7:
 Alternatively the GIT repository can also be cloned (For this, installation of ''git'' is required): Alternatively the GIT repository can also be cloned (For this, installation of ''git'' is required):
  
-''git clone https://github.com/C-CINA/focus.git''+''git clone https://github.com/LBEM-CH/focus.git''
  
  ===== Installing Dependencies =====  ===== Installing Dependencies =====
Line 46: Line 46:
 ./configure --enable-shared --enable-single --enable-threads --enable-sse --enable-sse2 --with-pic; ./configure --enable-shared --enable-single --enable-threads --enable-sse --enable-sse2 --with-pic;
 </nowiki> </nowiki>
 +
 +//or: On an M1 Mac, which doesn't support SSE://
 +
 +<nowiki>
 +./configure --enable-shared --enable-single --enable-threads --with-pic;
 +</nowiki>
 +
 +
  
 <nowiki> <nowiki>
Line 61: Line 69:
 <nowiki> <nowiki>
 ./configure --enable-shared --enable-threads --enable-sse2 --with-pic; ./configure --enable-shared --enable-threads --enable-sse2 --with-pic;
 +</nowiki>
 +
 +//or: On an M1 Mac, which doesn't support SSE://
 +
 +
 +<nowiki>
 +./configure --enable-shared --enable-threads --with-pic;
 </nowiki> </nowiki>
  
Line 73: Line 88:
 ==== Qt5 ==== ==== Qt5 ====
 Compilations of Qt5 is included in all the package managers we listed above. Qt5 can also be downloaded and installed from: http://www.qt.io/download-open-source/ Compilations of Qt5 is included in all the package managers we listed above. Qt5 can also be downloaded and installed from: http://www.qt.io/download-open-source/
 +
 +You also need the "qtscript5-dev - Qt 5 script development files", which are not installed by default with Qt5. 
 +Installing the qtscript5-dev is also needed. 
 +
 +On Linux, the command 
 +
 +''sudo apt-get install qtscript5-dev
 +''
 +
 +solves that problem.
  
 Make sure that after the installation you add Qt5 bin directory to the environment variable $PATH, and that: Make sure that after the installation you add Qt5 bin directory to the environment variable $PATH, and that:
  
-''qmake -query''+''qmake -query 
 +''
  
 gives you correct path to installed Qt libraries. gives you correct path to installed Qt libraries.
Line 84: Line 110:
 **NOTE for Mac OSX Users:** Qt Version 5.9.4 worked fine, while Qt Version 5.10.1 caused the error: **NOTE for Mac OSX Users:** Qt Version 5.9.4 worked fine, while Qt Version 5.10.1 caused the error:
 "build/apps/src/data/moc_ParameterConfiguration.cpp:175:63: error: 'init_priority' attribute is not supported on this platform." "build/apps/src/data/moc_ParameterConfiguration.cpp:175:63: error: 'init_priority' attribute is not supported on this platform."
 +
 +
 ===== Compiling Focus ===== ===== Compiling Focus =====
 Once everything is set up, CMAKE will automatically find the required paths and compile. This all has been scripted and Focus can easily be compiled by running the ''build_all'' script, which take between Once everything is set up, CMAKE will automatically find the required paths and compile. This all has been scripted and Focus can easily be compiled by running the ''build_all'' script, which take between
Line 93: Line 121:
 Focus is compiled in two stages. First we check the presence of all required dependencies and in the second stage we compile the entire source tree. Focus is compiled in two stages. First we check the presence of all required dependencies and in the second stage we compile the entire source tree.
  
-Upon building, Focus creates a directory "build", in which the configuration and built files are placed.  If building fails due to missing or wrong prerequisites, and you add those prerequisites later, then don't forget to remove the "build" directory before trying to "./build_all" again. Otherwise, the old configuration files in the "build" directory will still be present and steer the compilation into the wrong direction.+Upon building, Focus creates a directory "build", in which the configuration and built files are placed.  If compilation fails due to missing or wrong dependencies, and you add those dependencies later, then don't forget to remove the "build" directory before trying to "./build_all" again. Otherwise, the old configuration files in the "build" directory will still be present and steer the compilation into the wrong direction.
  
 === See also: === === See also: ===